CPD55


Asymetrical – 3 driven rolls Hydraulic positioning

Asymetrical new bending machines cpd55. BPR CURVATRICI.

Technical specifications
Shafts diameter mm. 55
Shafts useful lenght mm. 120
Standard rolls diameter (smooth) mm. 180
Dubble pressing rolls – Lower left/right
Power installed -Gear motor 2.20 Kw (50Hz)
Power installed -Pump motor 1,5 Kw + 1,5 (50 Hz)
Maximum working pressure bar 200
Bending direction left an right.
Maximum height of insertion mm 89
Working height to center of shafts mm 870 – 975
Thrust power of the hydraulic cylinder Kg 15.000 + 15.000
Rotation speed of the shafts G/1′: 1-10 (50Hz)
Translation speed of the pressing roll: 0-17 mm/sec
Three driven rolls HRC 58÷60
Steel frame FE 430B, heavily dimensioned.
Shaft in high strength alloy steel 38NiCrMo4, heat treated and ground to precision tolerance.
Gears in special alloy steel 38NiCrMo4 with precision ground teeth.
Clutch coupling mounted on the upper roll ( Torque Limiting Device ).
Working position of the shafts vertical/horizontal.
Hydraulic cylinder thrust.
Touchscreen DP10 control panel with functions displaying dual pressing rolls positioning.
Machine weight 740 Kg + 30
Torque limiter, peripheral speed adaption – Upper Shaft.
Standard voltage 400/3/ (50/60)
Machine dimensions: 890 x 1130 x 1260 h

STANDARD EQUIPMENT
– Control console.
– Rotation control pedal.
– Lateral rectifiers.
– Service tools kit.
– Instruction manual.

CPS 55 REV – In this version an inverter is installed in the special elctric panel that allows the adjustment of the rotation speed from a minimum of 0 g/1′ to a maximum of 20 g/1′

CAPACITY BASED UPON MILD STEELS MAX. TENSILE 40 KG/mm2 BASED ON 60.000

Asymetrical new bending machines cpd55. BPR CURVATRICI.