BA20

Asymetrical – Computerised numeric control – CNC

BROCHURE – BENDING CAPACITY

TECHNICAL DATA
Shafts diameter mm. 20
Rolls diameter (on request).
Drive motor 0,37 KW ( 50 HZ ).
Pump motor 1,1 KW ( 50 HZ ).
Heat exchanger for oil cooling.
Hydraulic cylinder thrust power kg 1150
Variable rotation speed rpm 1-30
Variable translation speed of bending roll 0-32 mm/sec.
Three driven rolls with smooth surface HRC 58÷60.
Steel frame FE 430B, heavily dimensioned.
High strength steel shafts 38NiCrMO4 hardened and ground.
Gears made in carbon steel 38NICrMo4 with ground gear teeth.
Working position with vertical and horizontal shafts.
Machine weight 228 kg.
Console weight 104 kg.
Machine dimensions 540x750x1020 h.
Console dimensions 590x710x1220 h.

OPERATING CHARACTERISTICS
Is a universal asymetrical bending machine with Computerised Numeric Control (CNC), who works in manual or in automatic mode and allows the direct insertion of the bending radius and of the data to obtain multiple forms and different developments.

The electronic control consists of a PLC central 64 bit system for control of the moving of the AXIS A1-A2 and of an industrial computer RASPBERRY Pi 64 bit- 1,4 GHz, 1 GB RAM, complete with SD card 16 GB.

Monitor LCD-HDMI-15-TFT coloured screen with active matrix for the interface with the operator, both of them assembled on detached mobile pulpit.

BPR multilingual bending program “PROBENDING ® system” facilitated by the acquisition of the type of material and the section of the profile, with possibility of archiving the works performed and default bends. File acquisition DXF.

Execution of variable radius bends, with interpolated axes system.

Ramps of acceleration and deceleration, stop and inversion of the cycle, self-learning program and mirror cycle.

Advancement reading encoder, cycle start limit switch, connection for digital archimeter.

Electronic control of the speed settings of moving of the bending roll (up to 32 mm/sec) and of the profile displacement (up to 30 RPM) in manual or automatic cycle.

Direct connection to a personal computer using the RJ-45 ( LAN) port with auto diagnostic and automatic set up of the machine. USB connection for the transfer and the copy of the bending programs.

STANDARD EQUIPMENT
– Control console.
– Lateral rectifiers.
– Rotation control pedal (optional).
– Service tools kit.
– Instruction manual.

Console Asymetrical bending machines BA20

CAPACITY BASED UPON MILD STEELS MAX. TENSILE 40 KG/mm2 BASED ON 60.000

ATTENTION: This machine is not supplied with standard rolls.